Combustion process and conditions
Fire prevention refers to reducing the flammability of materials in flames, slowing down the spread of flames, and quickly self-extinguishing when the flames are removed. 1. Combustion process and conditions The combustion process of fiber, that is, from ignition to combustion until it becomes the final combustion product, requires a series of complex physical and chemical changes. These changes have no obvious stages and can usually be divided into: (1) Fabric materials Thermal cracking produces flammable gases, non-flammable gases and carbonized residues. (2) Flammable pyrolysis, when the temperature reaches the ignition point or encounters other fire sources, it ignites and releases heat, smoke and smoke. (3) The heat released causes the fiber to continue to crack and burn, causing the flame to spread. The fiber burning process is shown in Figure 15-1.
From Figure 15-1, it can be seen that the conditions necessary for the combustion of fiber polymers are: (1) Thermal cracking of polymers produces flammable gases. (2) Oxygen or oxidants exist. (3) There is a heat source. In this way, the three elements of combustibles, heat and oxygen constitute the combustion cycle. In addition to the gas-phase flaming combustion of the above-mentioned flammable gases and oxygen, there is also the solid-phase flameless combustion of carbonized residues formed during cracking and oxygen. Flameless combustion requires much higher temperatures than flaming combustion, but this type of fire can also burn the material and sometimes cause a sudden burst of flame to become a flaming combustion.
AAAGFHJTYJUTI
Extendedreading:https://www.alltextile.cn/product/product-8-274.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
ExtendedReading:
Extendedreading:
Extendedread
