What is the difference between high-end combed, semi-combed and carded comb?
High quality: refers to the cotton quality is relatively high, which means the raw materials are guaranteed and better. Since it is a high-end finish, general combing is used during the post-finishing process.
Combing, semi-combing, and carding are the three methods of carding and finishing:
Combing: represents high quality, which is equivalent to an additional process, which is to The carded cotton slivers are drawn into rolls and then further combed through a combing machine in order to further remove short lint and impurities in the fibers and make the fibers straight and parallel. In this way, combed strips are made for use in the next process (drawing). The cotton yarn produced in this way has high strength, good evenness and good luster. It is generally used to produce spinning yarns with higher quality requirements or high-count spinning yarns.
Semi-finished system: represents medium quality. It is actually between carded and combed. This is generally done in fabric factories. For example, if 6 drawing lines are combined into one, then these 6 In the root, there are 3 combed cotton slivers and 3 carded cotton slivers, which produce semi-combed yarn. (You can also change the ratio, such as 2 and 4, or 4 and 2)
Common combing: represents low quality, which means combing the cotton roll (even the blowing and combing may not be rolled) The machine removes impurities and short lint so that the fibers follow one direction to a certain extent and is made into slivers for use in the next process (drawing).
AAASDFDNHGCXE
Extendedreading:https://www.brandfabric.net/mic-fiber-with-mirror-pu-leather-fabric/
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread
