temple device



Temple brace device Since water-jet looms are mainly used to weave various hydrophobic fiber fabrics, chemical fiber fabrics have obvious wear on the reed, and are generally equipp…

Temple brace device

Since water-jet looms are mainly used to weave various hydrophobic fiber fabrics, chemical fiber fabrics have obvious wear on the reed, and are generally equipped with reed protection devices. Therefore, their temple devices are significantly different from other types of looms. The form of fabric support can be divided into two types: upper fabric conveying and lower fabric conveying according to the fabric walking path. There are also forms that can be equipped with full effective width fabric bracing according to fabric requirements.
1. Top-running cloth temple
There are three types of thorn rings: double row and double row, double row and single row, and double roller. Users can choose according to the needs of fabric weaving.
Shown in Figure 3-32 is the upper walking fabric temple.
2. Bottom running fabric temple
The thorn ring is generally double row and double row at 14°10′, and the needle inclination angle is selected according to the user’s weaving requirements.
3. Full effective width temple
Adopts a rod-shaped fabric supporting rod, as shown in Figure 3-32. Its characteristic is that it can improve the stability of the cloth opening and reduce the wandering of the cloth opening. The diameter, surface texture and material can be changed according to the fabric type, and it is suitable for weaving large quantities of fabrics with a determined effective width.
                                                                                                          Floating fell fell.                                                                                                                During the weaving process of water-jet looms, the wear of the synthetic filaments on the steel reed is obvious, so water-jet looms are generally equipped with a floating fell fell mechanism (Figure 3-33), make the cloth mouth slowly swing up and down (about 3mm) during the weaving process, so that the contact between the reed feathers and the weft is not limited to a certain place, thereby avoiding the reed feathers from being worn out “Thin grooves”, making it unusable.
                                                                                                                                                                                                                                                             Rotates together with the friction roller 5 9 swings up and down, so that the cloth fell close to the top surface of the cloth holder 9 also swings up and down (because the cloth surface is tightened and has tension, it always sticks to the cloth holder 9) to achieve floating.
AAAMHGCVVBEW

Extendedreading:https://www.yingjietex.com/product/Tn-Textile-50d-75D-150d-Imitation-Memory-Fabric-100-Polyester-Filament-Fabric-for-Garment-Jacket.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.chinagarments.com】 position, reproduced please specify the source.https://www.chinagarments.com/archives/10227

Author: clsrich

 
TOP
Home
News
Product
Application
Search