To use the solar photocatalytic system for dry cleaning, you can follow the following steps:
1. Preparation: Make sure that the solar photocatalytic system and dry cleaning machine are in normal condition working status. Check that the catalyst and filter are clean and properly installed.
2. Fill water: Add an appropriate amount of cleaning liquid or solution to the dry cleaning machine according to the requirements of the dry cleaning machine. Ensure that the water quality meets the requirements and does not affect the working effect of the catalytic system.
3. Start the catalytic system: Turn on the power of the solar photocatalytic system and connect it to the dry cleaning machine. According to the operating instructions of the catalytic system, start the catalytic reaction and set the appropriate time and temperature.
4. Clean items: Put the items to be cleaned into the dry cleaning machine and close the door of the dry cleaning machine. According to the operating instructions of the dry cleaning machine, select the appropriate washing program and parameters and start the dry cleaning machine.
5. Photocatalytic treatment: During the dry cleaning process, the solar photocatalytic system will continuously release active oxygen and other organic matter decomposition products. These substances can effectively remove stains and kill bacteria through photocatalysis. At the same time, the catalytic system will adsorb and decompose harmful gases and odors remaining in the air.
6. Complete dry cleaning: According to the set time of the dry cleaning machine, after the dry cleaning process is completed, open the door of the dry cleaning machine and take out the dry-cleaned items. Be careful to avoid burns or other injuries during operation.
7. Turn off the catalytic system: After completing dry cleaning, promptly turn off the power of the solar photocatalytic system and disconnect it from the dry cleaning machine. Clean and maintain the catalyst and filter to ensure they are in good working order for next use.
Please note that the specific operating procedures may vary due to different solar photocatalytic systems and dry cleaning machines. Please operate correctly according to the operating instructions of the equipment. . In addition, when using a solar photocatalytic system for dry cleaning, pay attention to safe operations and avoid direct contact with cleaning liquids, high-temperature objects, and overexposure to active oxygen generated by the catalyst.
