Common problems and solutions in the men’s clothing fine-making process are as follows:
1. Uneven stitches: Uneven stitches may be due to problems with the sewing machine settings or Caused by improper operation. The solution is to check whether the thread tension of the sewing machine is balanced and adjust the appropriate thread tension; at the same time, keep the manual operation stable and try to avoid shaking.
2. The thread end is easy to break: thread breakage may be caused by poor thread quality, excessive thread tension, needle eye wear, etc. The solution is to use good quality thread and adjust the appropriate thread tension; at the same time, regularly replace sewing machine needles with severely worn needle holes.
3. Uneven cloth pulling: Uneven cloth pulling may be caused by uneven stretching of the fabric, improper adjustment of the tension of the sewing machine, etc. The solution is to straighten the fabric evenly before sewing and adjust the tension of the sewing machine so that it is consistent with the tension of the fabric.
4. Inaccurate cutting: Inaccurate cutting may be caused by errors in cutting or inappropriate cutting tools. The solution is to measure accurately before cutting, use appropriate cutting tools, and keep your hands steady.
5. Stitches are easy to loosen: Loose stitches may be caused by weak stitches of the sewing machine, insufficient stitching tightness, etc. The solution is to use the appropriate sewing machine thread, adjust the appropriate thread tension, and ensure the tightness of the stitches.
6. Wrinkles at curves: Wrinkles at curves may be caused by the fabric not matching the curves of the cutting design. The solution is to keep the fabric flat when cutting and perform appropriate pre-processing, such as cutting the fabric at the curve in advance and tightening the stitches appropriately when sewing.
7. Inaccurate buttonhole perforation: Inaccurate buttonhole perforation may be caused by inaccurate perforation position or damage to the perforation tool. The solution is to use a professional buttonhole piercing tool, punch holes accurately according to specifications, and regularly check the status of the piercing tool.
The above is a general analysis of common problems and solutions in the men’s clothing fine-making process. In actual work, specific problems need to be analyzed and solved based on specific circumstances.
