Cleaning the lining of a down jacket is very important. The correct method can maintain the warmth and service life of the down jacket. Here’s a detailed guide on how to remove and clean your down jacket liner to keep it clean.
Step 1: Preparation
1. First, prepare a basin of warm water and some mild laundry detergent. Avoid using bleach or detergents containing heavy metals, which can damage the down.
2. Check if there are any scratches, tears or broken parts on the liner. If there are, it’s best to fix them before cleaning to avoid making the problem worse during the cleaning process.
Step 2: Remove the liner
1. Find the zipper of the liner and pull it open completely. Check whether there are other fixing parts in the inner tank, such as buttons, hooks, etc.
2. Follow the liner manufacturer’s instructions and carefully read and understand the structure of the liner. Note and remove additional parts as necessary.
Step 3: Wash the inner pot
1. Place the inner pot into a basin and make sure it is completely soaked in warm water. Gently stir the inner container with your hands to distribute the laundry detergent evenly.
2. Use a soft brush to gently wipe the surface of the liner, especially the areas with heavy stains. Avoid using too much force to avoid damaging the down filling.
3. After cleaning, rinse the inner tank thoroughly with clean water to ensure that the detergent is completely removed.
Step 4: Remove water
1. Gently squeeze the inner pot to drain as much excess water as possible. But please don’t use too much force to avoid damaging the down.
2. Place the liner flat on a well-absorbent towel, then roll up the towel and squeeze gently to absorb the remaining moisture. You can repeat this step several times if needed.
Step 5: Dry the liner
1. Dry the liner in a well-ventilated area. You can choose outdoor or indoor, but avoid direct sunlight.
2. Turn and pat the liner regularly to restore the fluffiness of the down. This helps prevent down collapse and condensation.
Step 6: Completely dry
1. Make sure the inner bag is completely dry before putting it back on the jacket. Even a slight amount of moisture can cause the inner liner to become moldy and affect the warmth retention effect.
2. If possible, you can use a professional clothes dryer to dry the inner container at low temperature to achieve the best drying effect.
The above is a detailed guide on disassembling and cleaning the lining of your down jacket. Please note that the construction and materials of each liner may vary slightly, so always read and follow the liner manufacturer’s instructions before cleaning. Correct cleaning methods can help you keep your down jacket clean and warm, and extend its service life.
