Hemp fabric craft design



Hemp fabric craft design 1. Raw material pre-processed hemp has high colloid content, thick and hard fibers, and poor cohesion. Softener and a certain amount of moisture should be …

Hemp fabric craft design

1. Raw material pre-processed hemp has high colloid content, thick and hard fibers, and poor cohesion. Softener and a certain amount of moisture should be added before use, and cured for 24 hours under high temperature and high humidity conditions to maintain the moisture regain of hemp. Around 12%. It is then combed to separate the strands, impurities, short lint, etc. in the noiled fiber from the fibers. For the pretreatment of yak down, 0.5%-3% silicon solution is added for humidification treatment to maintain the moisture regain at about 12%. Tencel and multi-spun fibers do not require special treatment and can be used directly after entering the factory.
 2. According to the different characteristics of each fiber, two mixing options can be used for raw material mixing: (1) Hemp and velvet, Tencel and multi-spun fibers are mixed separately during cleaning (a multi-silo mixing system is required in the cleaning process) . (2) After the blowing and carding process, the two kinds of raw sliver are mixed in the drawing process. In order to make the mixing uniform, the purchasing channel mixing must be adopted.
AAAASE3RETRUY7I8OFG

Extendedreading:https://www.yingjietex.com/product/Elevation-Dobby-Polyester-OXFORD-Fabric.html
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedreading:
Extendedread

This article is from the Internet, does not represent 【www.chinagarments.com】 position, reproduced please specify the source.https://www.chinagarments.com/archives/10700

Author: clsrich

 
TOP
Home
News
Product
Application
Search